+1 800 505-05-67
+1 219 221-11-82
Lighting poles round tapered OCC flange is designed for lighting of streets and thoroughfares parks squares alleys of the boulevards and the quays of the territory of petrol stations and housing estates.
Support round tapered OCC used for decorative lighting.
According to the norms of SNiP 2.01.07-85 Loads and impacts operation supports the OCC permitted in the territories belonging to the I-VII areas for wind loads.
Support fabrication of the JCC runs from sheet steel with a thickness of 3-4 mm.
The brand and the thickness of the steel selected in accordance with climatic conditions and operating conditions. The norms according to which the chosen brand of metal set out in SNiP II-23-81 Steel supports. Available in height from 3 to 12 meters. Supports the OCC's non-coercive support they are not designed for high load cabling to them is through the underground.
Depending on the installation method support OCC are flanged or pramocaine. Flange supports are installed onto the Foundation block by means of flanged connections and pramocaine dig into the ground and then are cast.
Types of used brackets
Decorative Park and searchlight cantilever brackets for support series OCC do not have shells.
Cable lead underground.
The poles are mounted on the flange of a fixture Foundation.
The bracket is fixed to top of pedestal using bolts.
Hot-dip galvanizing according to GOST 9.307-89 polymer powder or paint in the colors